SwissVoice ePure User Manual download pdf (Page 6)

ePure

4 ePure

Battery advice

Use only the original battery (Li-Ion 3.7 V / 550 mAh) as well as the original power sup-

ply (7.5 VDC, 300mA).

The handset operating times (standby 150 hours/active 10 hours) and charging times

apply only if the battery is charged to the defined minimum capacity.

Charging is electronically controlled to ensure optimal charging and care of battery in

different charge states. Full capacity is achieved only after several charging cycles.

Insert the battery

The battery compartment is situated in

the handset.

Open the handset cover.

Insert the battery in the battery compart-

ment.

Replace the handset cover.

Note:

Using other rechargeable battery or non-rechargeable battery/primary cells

can be dangerous and cause malfunctions or damage to the telephone. Do

not short-circuit the battery (danger). In particular, avoid inadvertent short-

circuits during storage and transport e.g. bunch of keys, metal panels or

similar objects, and make sure the battery do not come into contact with

greasy materials. When not in the handset, therefore, battery should be

stored only in insulating packaging. Ensure also that the contacts do not

touch greasy parts.

Rechargeable battery can become warm while recharging. This is a normal

occurrence and is not dangerous.

Make sure you install the battery pack and fit the cover the right way round:

- position the 3 metal contacts of the battery pack against the 3 blade

contacts,

- align the green dot on the handset with the one on the cover.

Green dots

ePure_GB_191110_DTP direkt 19.11.10 10:55 Seite 4

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

SwissVoice ePure User Manual Page 6